Auto Mains (Utility) Failure Control Modules

Auto Mains (Utility) Failure Control Modules

Auto mains failure control modules for single generator set applications.

From compact yet powerful controllers like the DSE4520MKII, next generation controllers like the DSE6120MKIII or powerful controllers with RS232, RS485, Ethernet, USB, SNMP and PLC editor like the DSE7420MKII and everything in between. There is a DSE generator controller to suit your appplication.

Explore the range of DSE auto mains failure control modules.

DSE4520 MKII

DSE4520 MKII

Auto Mains (Utility) Failure Control Module

The DSE4520 MKII is a compact Auto Mains (Utility) Failure Control Module that has been developed to provide an outstanding range of features within a compact enclosure. 

OVERALL SIZE
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.5”) 
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6" x 3.6")
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.26kg
PRODUCT VARIANTS
4520-05 - 4520 Auto Mains (Utility) Failure Control Module (Ct, Rtc)
4520-06 - 4520 Auto Mains (Utility) Failure Control Module (Ct, Rtc, Htr)
4520-07 - 4520 Auto Mains (Utility) Failure Control Module (Ct, Rtc

KEY FEATURES

  • Auto Start and AMF mode in one module (DSE4520 MKII only)
  • J1939-75 support and CAN alarm ignore functon
  • Alternator frequency & CAN speed sensing in one variant
  • Largest back-lit icon display in its class
  • Heated display option
  • Real time clock provides accurate event logging
  • Fully configurable via the fascia or PC using USB communication
  • Extremely efficient power save mode
  • 3 phase generator sensing
  • 3 phase mains (utility) sensing (DSE4520 MKII only)
  • Compatible with 600 V ph to ph nominal systems
  • Generator/load power monitoring (kW, kV A, kV Ar, pf)
  • Accumulated power monitoring (kW h, kVA h, kVAr h)
  • Generator overload protection (kW)
  • Generator/load current monitoring and protection
  • Fuel and start outputs (configurable when using CAN)
  • 4 configurable DC outputs
  • 3 configurable analogue/digital inputs
  • 4 configurable digital inputs
  • Configurable staged loading outputs
  • 3 engine maintainance alarms
  • Engine speed protection
  • Engine hours counter
  • Engine pre-heat
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Tier 4 engine instrumentation screens
  • Battery voltage monitoring
  • Start on low battery voltage
  • Configurable remote start input
  • 1 alternative configuration
  • Comprehensive warning, electrical trip or shutdown protection upon fault condition
  • LCD alarm indication
  • Event log (50)
  • Fuel solenoid pulling circuit
  • On-screen line diagram on/off functionality
  • Configurable CAN instrumentation (10)
  • Water in fuel digital input
  • Tank bund alarm digital input
  • Generator at rest output
  • ECU periodic wake-up for information retrieval
  • Back-light power-save mode
  • Adjustable delay crank timer
  • Pre/post heat functionality
  • Overload protection
  • Mains/generator A/C system selection
  • Output timer for external audible alarm
Enquire
DSE4620

DSE4620

Auto Mains (Utility) Failure Control Modules

The DSE4620 is a compact Auto Mains (Utility) Failure Control Module that has been developed to provide an outstanding range of features within a compact enclosure. 

OVERALL SIZE
140 mm x 113 mm x 43 mm
PANEL CUTOUT SIZE
118 mm x 92 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.28kg
PRODUCT VARIANTS
4620-03 - 4620 Auto Mains (Utility) Failure Control Module (Mpu,Ct,Rtc)

KEY FEATURES

  • Alternator frequency & MPU speed sensing in one variant
  • Largest back-lit icon display in its class
  • Real time clock provides accurate event logging
  • Fully configurable via the fascia or PC using USB communication
  • Extremely efficient power save mode
  • 3 phase generator sensing
  • 3 phase mains (utility) sensing (DSE4620 only)
  • Generator/load power monitoring (kW, kV A, kV Ar, pf)
  • Generator/load current monitoring and protection
  • Fuel and crank outputs
  • Compatible with 600 V ph to ph nominal systems
  • 4 configurable DC outputs
  • 3 configurable analogue/digital inputs
  • 4 configurable digital inputs
  • Configurable staged loading outputs
  • 3 engine maintainance alarms
  • Engine speed protection
  • Engine hours counter
  • Engine pre-heat
  • Engine run-time scheduler
  • Battery voltage monitoring
  • Start on low battery voltage
  • Configurable remote start input
  • 1 alternative configuration
  • Comprehensive warning, electrical trip or shutdown protection upon fault condition
  • LCD alarm indication
  • Event log (50)
Enquire
DSE6020 MKII

DSE6020 MKII

Auto Mains (Utility) Control Module

The DSE6020 MKII is an Auto Mains (Utility) Failure Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets. 

OVERALL SIZE
216 mm x 158 mm x 43 mm
PANEL CUTOUT SIZE
184 mm x 137 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.48kg
PRODUCT VARIANTS
6020-03 - MKII Auto Mains (Utility) Failure Control Module
6020-04 - MKII Auto Mains (Utility) Failure Control Module (Htr)

KEY FEATURES

  • Large back-lit icon display
  • Heated display option available
  • Fully configurable via the fascia or PC using USB communication
  • Efficient power save mode
  • 3 phase generator sensing
  • 3 phase mains (utility) sensing (DSE6020 MKII only)
  • Generator/load power monitoring (kW, kV A, kV Ar, pf)
  • Accumulated power monitoring (kW h, kVA h, kVAr h)
  • Generator overload protection (kW)
  • Generator/load current monitoring and protection
  • Breaker control via fascia buttons
  • Fuel and start outputs, configurable when using CAN
  • 4 configurable DC outputs
  • 4 configurable analogue/digital inputs
  • 6 configurable digital inputs
  • Support for 0-10 V & 4-20 mA oil pressure sensors
  • Configurable staged loading outputs
  • CAN, MPU and alternator speed sensing in one variant
  • 3 engine maintenance alarms
  • Engine speed protection
  • Engine hours counter
  • Engine pre-heat
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel pump control
  • Real time clock
  • Battery voltage monitoring
  • Start on low battery voltage
  • Configurable remote start input
  • 1 alternative configuration
  • Comprehensive warning, electrical trip or shutdown protection upon fault condition
  • LCD and LED alarm indication
  • Configurable event log (50)
Enquire
DSE6120 MKIII

DSE6120 MKIII

Auto Mains (Utility) Failure Control Module

The DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications.  

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC.

The DSE6120 MKIII will also monitor the mains (utility) supply. 

The module includes USB connection and dedicated DSENet® terminals for system expansion.

The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The extensive list of features includes enhanced event and performance monitoring, remote communications & PLC functionality. The modules can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available.

OVERALL SIZE
216 mm x 158 mm x 43 mm
PANEL CUTOUT SIZE
184 mm x 137 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.5kg
PRODUCT VARIANTS
6120-05 - 6120 MKIII Auto Mains (Utility) Failure Control Module

KEY FEATURES

  • 4-line back-lit LCD text display
  • Multiple display languages
  • Five-key menu navigation
  • LCD alarm indication
  • Customisable power-up text and screen images.
  • DSENet® expansion compatibility
  • Data logging facility
  • Internal PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB communications
  • Front panel configuration with PIN protection
  • Power save mode
  • 3-phase generator sensing and protection
  • 3-phase mains (utility) sensing and protection (DSE6120 MKIII only)
  • Automatic load transfer control (DSE6120 MKIII only)
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • Mains (utility) current and power monitoring (kW, kvar, kVA, pf) (DSE6120 MKIII only)
  • kW overload alarm
  • Over current protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 6 configurable DC outputs
  • 4 configurable analogue/digital inputs
  • Support for 0 V to 10 V & 4 mA to 20 mA sensors
  • 8 configurable digital inputs
  • CAN, MPU and alternator frequency speed sensing in one variant
  • Real time clock
  • Manual and automatic fuel pump control
  • Engine pre-heat and post-heat functions
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel level alarms
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including Tier 4 engine support
  • Uses DSE Configuration Suite PC Software for simplified configuration
  • Licence-free PC software
  • IP65 rating (with optional gasket) offers increased resistance to water ingress
  • Configurable CAN read & transmitted information.
  • 1 alternative configuration.
Enquire
DSE7120 MKII

DSE7120 MKII

Auto Mains (Utility) Failure Control Modules

The DSE7120 is an Auto Mains (Utility) Failure Control Module with an icon-based display. The control module has been designed to control single diesel or gas gen-set applications. 

OVERALL SIZE
240 mm x 181 mm x 42 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.82kg
PRODUCT VARIANTS
7120-01 - 7120 MKII Auto Mains (Utility) Control Module

KEY FEATURES

  • Large back-lit icon display
  • Heated display option available
  • Fully configurable via the fascia or PC using USB communication
  • Extremely efficient power save mode
  • 3 phase generator sensing
  • 3 phase mains (utility) sensing (DSE7120 MKll only)
  • Generator/load power monitoring (kW, kV A, kV Ar, pf)
  • Generator overload protection (kW)
  • Generator/load current monitoring and protection
  • Fuel and start outputs (configurable when using CAN)
  • 4 configurable DC outputs
  • 2 configurable volt-free outputs
  • 4 configurable analogue/digital inputs
  • 6 configurable digital inputs
  • Support for 0-10 V & 4-20 mA oil pressure sensors
  • Configurable staged loading outputs
  • CAN, MPU and alternator speed sensing in one variant
  • 3 engine maintenance alarms
  • Engine speed protection
  • Engine hours counter
  • Engine pre-heat
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Battery voltage monitoring
  • Start on low battery voltage
  • Real time clock
  • Fuel pump control
  • Configurable remote start input
  • 1 alternative configuration
  • Comprehensive warning, electrical trip or shutdown protection upon fault condition
  • LCD and LED alarm indication
  • Event log (50)
Enquire
DSE7320 MKII

DSE7320 MKII

Auto Mains (Utility) Failure Control Module

The DSE7320 MKII is a powerful, new generation Auto Mains (Utility) Failure genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. 

Featuring a new Dual Core main processor and extended memory, the module provides faster and more powerful processing power, returning faster operational responses on intensive applications and increased functionality, with data logging facility. 

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED's, remote PC's and via SMS text alerts (with external communication device).

OVERALL SIZE
245 mm x 184 mm x 51 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm
PRODUCT VARIANTS
7320-03 - 7320 MKII Auto Mains (Utility) Failure Control Module

KEY FEATURES

  • 4-Line back-lit LCD text display
  • Multiple Display Languages
  • Five key menu navigation
  • LCD alarm indication
  • Heated display option available
  • Customisable power-up text and images
  • DSENet expansion compatibility
  • Data logging facility
  • Internal PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB, RS232 & RS485 communication
  • Front panel configuration with PIN protection
  • Power save mode
  • 3 phase generator sensing and protection
  • 3 phase mains (utility) sensing and protection (DSE7320 MKII only)
  • Automatic load transfer control (DSE7320 MKII only)
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • Mains current and power monitoring (kW, kvar, kVA, pf) (DSE7320 MKII only)
  • kW and kvar overload and reverse power alarms
  • Over current protection
  • Unbalanced load protection
  • Independent earth fault protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 6 configurable DC outputs
  • 2 configurable volt-free relay outputs
  • 6 configurable analogue/digital inputs
  • Support for 0 V to 10 V & 4 mA to 20 mA sensors
  • 8 configurable digital inputs
  • Configurable 5 stage dummy load and load shedding outputs
  • CAN, MPU and alternator frequency speed sensing in one variant
  • Real time clock
  • Manual and automatic fuel pump control
  • Engine pre-heat and post-heat functions
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel usage monitor and low fuel level alarms
  • Simultaneous use of RS232 and RS485 communication ports
  • True dual mutual standby using RS232 or RS485 for accurate engine hours balancing.
  • MODBUS RTU support with configurable MODBUS pages.
  • Advanced SMS messaging (additional external modem required)
  • Start & stop capability via SMS messaging
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including tier 4 engine support
  • Uses DSE Configuration Suite PC Software for simplified configuration
  • Licence-free PC software
  • IP65 rating (with supplied gasket) offers increased resistance to water ingress
  • Modules can be integrated into building management systems (BMS) using MODBUS RTU
Enquire
DSE7420 MKII

DSE7420 MKII

Auto Mains (Utility) Failure Control Module

The DSE7420 MKII is an intelligent, powerful auto mains (utility) failure control module with high-level features and functionality. The control module is the first module in the DSE range to include in-built SNMP and features an embedded web server. The module is suitable for a wide range of single-set gas and diesel applications. 

The control module features an enhanced dual core main processor and extended memory capacity. This allows the module to deliver a faster more powerful performance to return quicker operating responses on complex applications and provides enhanced memory storage for high level data logging functionality. 

OVERALL SIZE
245 mm x 184 mm x 51 mm (9.6” x 7.2” x 2.0”) 
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7" x 6.3")
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.88kg
PRODUCT VARIANTS
7420-03 - 7420 MKII Auto Mains (Utility) Failure Control Module
7420-04 - 7420 MKII Auto Mains (Utility) Failure Control Module (Htr)

KEY FEATURES
  • 4-Line back-lit LCD text display
  • Multiple Display Languages
  • Five key menu navigation
  • LCD alarm indication
  • Heated display option available
  • Customisable power-up text and images
  • DSENet expansion compatibility
  • Data logging facility upto 20 parameters
  • Internal PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB, RS232, RS485 and ethernet communication
  • Front panel configuration with multi-level PIN protection
  • Power save mode
  • 3 phase generator sensing and protection
  • 3 phase mains (utility) sensing and protection (DSE7420 MKII only)
  • Automatic load transfer control (DSE7420 MKII only)
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • Mains current and power monitoring (kW, kvar, kVA, pf) (DSE7420 MKII only)
  • kW and kvar overload and reverse power alarms
  • Over current protection
  • Unbalanced load protection
  • Independent earth fault protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 6 configurable DC outputs
  • 2 configurable volt-free relay outputs
  • 6 configurable analogue/digital inputs
  • Support for 0 V to 10 V & 4 mA to 20 mA sensors
  • Support for 3 kΩ resistive sensors
  • 8 configurable digital inputs
  • Configurable 5 stage dummy load and load shedding outputs
  • CAN, MPU and alternator frequency speed sensing in one variant
  • Real time clock
  • Manual and automatic fuel pump control
  • Engine pre-heat and post-heat functions
  • Engine run-time scheduler
  • Engine idle control for starting & stopping
  • Fuel usage monitor and low fuel level alarms
  • Simultaneous use of RS232, RS485 & ethernet communication ports
  • True dual mutual standby using RS232 or RS485 for accurate hours balancing.
  • MODBUS RTU & TCP support with configurable MODBUS pages.
  • SNMP GET, SET and TRAP support built in.
  • Advanced SMS messaging (additional external modem required)
  • Start & stop capability via SMS messaging
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including tier 4 engine support
  • J1939-75 support & CAN alarm ignore function
  • Uses DSE Configuration Suite PC Software for simplified configuration
  • Licence-free PC software
  • IP65 rating (with supplied gasket) offers increased resistance to water ingress
  • Modules can be integrated into building management systems (BMS) using MODBUS RTU & TCP
  • Configurable CAN parameters to read and display CAN information from external CAN devices.
Enquire
DSE6020MKII

DSE6020MKII

Spec sheet Enquire