Load Sharing & Synchronising Control Modules

Load Sharing & Synchronising Control Modules

Load sharing and synchronising control modules for multi-set generator control solutions.

From the DSE8610 MKII designed to handle the most complex grid type generator applications, the DSE8680 designed to control a generator bus-tie breaker, the DSE8660 MKII auto transfer switch and mains control module or the top of the line DSE8920 7" colour load share and synchronising control module and everything in between. There is a DSE synchronising generator controller to suit your appplication.

Explore the range of DSE auto mains failure control modules.

 

DSE8610 MKII

DSE8610 MKII

Synchronising & Load Sharing Auto Start Control Module

The DSE8610 MKII represents the latest in complex load sharing & synchronising control technology. Designed to handle the most complex grid type generator applications the DSE8610 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. 

OVERALL SIZE
245 mm x 184 mm x 51 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm (0.3")

WEIGHT
0.88kg

PRODUCT VARIANTS
8610-02 - 8610 MKII Synchronising & Load Sharing Control Module (Ct, Rtc)

KEY FEATURES

  • Comprehensive synchronising & loadsharing capabilities
  • Built in governor and AVR control
  • Base load (kW export) control
  • Positive & negative kVAr export control
  • Mains (Utility) decoupling protection
  • 4-Line back-lit LCD text display
  • Multiple Display Languages
  • Five key menu navigation
  • LCD alarm indication
  • Heated display option available
  • Customisable power-up text and images
  • DSENet expansion compatibility
  • Data logging & trending facility
  • Internal PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB, RS232, RS485 & Ethernet communication
  • Front panel configuration with PIN protection
  • Power save mode
  • 3 phase generator sensing and protection
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • kW and kvar overload alarms
  • Reverse power alarms
  • Over current protection
  • Unbalanced load protection
  • Independent earth fault protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 8 configurable DC outputs
  • 2 configurable volt-free relay outputs
  • 4 configurable analogue/digital inputs
  • Built in sensors to support 0 V to 10 V & 4 mA to 20 mA
  • 12 configurable digital inputs
  • Configurable 5 stage dummy load and load shedding outputs
  • CAN, MPU and alternator frequency speed sensing in one variant
  • Real time clock
  • Manual and automatic fuel pump control
  • Engine run-time scheduler
  • Fuel usage monitor and low fuel level alarms
  • Simultaneous use of all communication ports
  • Remote SCADA monitoring via various DSE software applications
  • MODBUS RTU & TCP support with configurable MODBUS pages for integration into building management systems (BMS)
  • Advanced SMS messaging (additional external modem required)
  • Start & stop capability via SMS messaging
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including tier 4 engine support
  • Uses DSE Configuration Suite PC Software for simplified configuration
  • Power modes for when in parallel with the mains
  • Redundant MSC communication wired to CAN ports
  • True manual breaker control when in CAN mode
  • Water in fuel digital input
  • Fuel tank bund alarm digital input
  • Separate ramp up and ramp down rates configurable via PLC
  • Configurable CAN message time- outs
  • In-built SNMP
  • Configurable CAN transmit & receive
  • Battery chargers on DSENet®
Enquire
DSE8620 MKII

DSE8620 MKII

Synchronising Auto Mains (Utility) Failure Load Share Control Module

The DSE8620 MKII represents the latest in complex load sharing & synchronising control technology. Designed to synchronise a single genset with a mains (utility) supply, the DSE8620 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry.

The controller also has the option to be configured for use as a DSE8610 MKII Auto Start Load Sharing & Synchronising Control Module. When converted for use as a DSE8610 MKII the unit provides generator to generator load share functionality. 

OVERALL SIZE
245 mm x 184 mm x 51 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm

WEIGHT
0.88kg

PRODUCT VARIANTS
8620-02 - 8620 MKII Synchronising Auto Mains (Utility) Failure Load Sharing Control Module

KEY FEATURES

  • Comprehensive synchronising & loadsharing capabilities
  • Built in governor and AVR control
  • Base load (kW export) control
  • Positive & negative kVAr export control
  • Mains (Utility) decoupling protection
  • Mains (Utility) failure detection
  • Mains (Utility) power (kW, kV Ar, kV A & pf) monitoring
  • Mains (Utility) de-coupling protection
  • Mains (Utility) kW export protection
  • Peak lopping & shaving functionality
  • 4-Line back-lit LCD text display
  • Multiple Display Languages
  • Five key menu navigation
  • LCD alarm indication
  • Heated display option available
  • Customisable power-up text and images
  • DSENet® expansion compatibility
  • Data logging & trending facility
  • Internal PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB, RS232, RS485 & Ethernet communication
  • Front panel configuration with PIN protection
  • Power save mode
  • 3 phase generator sensing and protection
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • kW and kvar overload alarms
  • Reverse power alarms
  • Over current protection
  • Unbalanced load protection
  • Independent earth fault protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 8 configurable DC outputs
  • 2 configurable volt-free relay outputs
  • 4 configurable analogue/digital inputs
  • Built in sensors to support 0 V to 10 V & 4 mA to 20 mA
  • 12 configurable digital inputs
  • Configurable 5 stage dummy load and load shedding outputs
  • CAN, MPU and alternator frequency speed sensing in one variant
  • Real time clock
  • Manual and automatic fuel pump control
  • Engine run-time scheduler
  • Fuel usage monitor and low fuel level alarms
  • Simultaneous use of all communication ports
  • Remote SCADA monitoring via various DSE software applications
  • MODBUS RTU & TCP support with configurable MODBUS pages for integration into building management systems (BMS)
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including tier 4 engine support
  • Uses DSE Configuration Suite PC Software for simplified configuration
Enquire
DSE8660 MKII

DSE8660 MKII

Auto Transfer Switch & Mains (Utility) Control Module

The DSE8660 MKII is the latest and most advanced Auto Transfer Switch & Mains (Utility) Control Module within the DSE synchronising and load sharing control module range. Developed alongside the DSE8610 MKII this control module provides industry-leading features and benefits for the most complex grid type generator installations.

OVERALL SIZE

245 mm x 184 mm x 51 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm

WEIGHT
0.88kg

PRODUCT VARIANTS
8660-02 - 8660 MKII Auto Transfer Switch & Mains (Utility) Control Module (Ct, Rtc)

KEY FEATURES

  • Mains (utility) failure detection
  • Mains (utility) power monitoring (kW, kV Ar, kV A and pf)
  • Comprehensive synchronising and loadsharing capabilities
  • Peak lopping & shaving functionality
  • Mains (utility) kW export protection
  • Mains (utility) de-coupling protection
  • Advanced integral PLC editor
  • User configurable RS232, RS485 & Ethernet communications
  • MODBUS RTU & TCP support
  • User configurable MODBUS pages
  • Advanced SMS control and fault messaging (addition GSM modem required)
  • DSENet expansion compatible
  • Data logging and trending
  • 4-Line back-lit LCD text display
  • Multiple display languages
  • Five key menu navigation
  • Front panel editing with PIN protection
  • Customisable status screens
  • Configurable inputs (11)
  • Configurable outputs (8)
  • Configurable timers and alarms
  • Multiple entry scheduler
  • Configurable event log (250)
  • Easy access diagnostic pages
  • LED and LCD alarm indication
  • USB connectivity
  • Backed up real time clock
  • Fully configurable via DSE Configuration Suite PC Software
  • Power modes for when in parallel with the mains
  • Redundant MSC communication wired to CAN ports
  • True manual breaker control when in manual mode
  • Native no bus breaker support for signal ATS applications
  • Separate ramp up and ramp down rates configurable via PLC
  • In-built SNMP
  • Configurable CAN transmit & receive
  • Battery Chargers on DSENet®
Enquire
DSE8680

DSE8680

Synchronising Generator Bus Tie Control Module

The DSE8680 is an intelligent control module designed to control a generator bus-tie breaker. The control module features technology that automatically manages the synchronising and check-sync across the breaker using the DSE multi-set communications (MSC) link when opening and closing the bus-tie breaker.

OVERALL SIZE
240 mm x 181 mm x 42 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.86kg
PRODUCT VARIANTS
8680-01 - 8680 Synchronising Generator Bus Tie Control Module

KEY FEATURES

  • Comprehensive synchronising & loadshare capabilities
  • Connects to two DSE MSC links, one for ‘bus 1’ and another for ‘bus 2’
  • Advanced integral PLC editor
  • 11 Configurable inputs
  • 8 Configurable outputs
  • DSENet® expansion compatibility
  • User configurable RS232, RS485 and Ethernet communications
  • Remote SCADA monitoring via various DSE software applications
  • MODBUS RTU & TCP support
  • User configurable MODBUS pages
  • Advanced SMS control and fault messaging (additional GSM modem required)
  • Easy access diagnostic pages including modem diagnostic pages
  • Data logging and trending
  • Front panel editing with PIN protection
  • Fully configurable using DSE Configuration Suite PC software via USB
  • 4 Line back-lit LCD text display
  • LED and LCD alarm indication
  • Configurable display languages
  • Customisable status screens
  • Configurable event log (250)
  • Backed up real time clock
Enquire
DSE8810

DSE8810

Load Share Control with Graphical Colour Display

The DSE8810 is an intelligent graphical colour display load share control module packed with industry leading features to enhance multi-set control. The module can be synchronised with up to 32 generators within the same system. 

OVERALL SIZE
245 mm x 184 mm x 50 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.98kg
PRODUCT VARIANTS
8810-01 - 8810 Load Share Control Module with Graphical Colour Display

KEY FEATURES

  • Configurable inputs (11)
  • Configurable outputs (8)
  • Built-in governor and AVR control
  • Comprehensive electrical protection
  • Comprehensive loadshare capabilities
  • RS232, RS485 & Ethernet remote communications
  • Modbus RTU/TCP support
  • Back-lit LCD graphical display
  • Configurable display languages
  • Audible alarm
  • Reduced file transfer time
  • Engine protection
  • Fault condition notification to a designated PC
  • Front panel editing with PIN protection
  • Flexible sender inputs
  • Configurable timers and alarms
  • 3 configurable maintenance alarms
  • Multiple date and time scheduler
  • Configurable event log (250)
  • Easy access diagnostic page
  • CAN and Magnetic Pick-up/Alt. sensing
  • Fuel usage monitor and low fuel alarms
  • Manual fuel pump control
  • “Protections disabled” feature
  • kW overload protection
  • Reverse power protection
  • Power monitoring (kW h, kV Ar, kV A h, kV Ar h)
  • Load switching (load shedding and dummy load outputs)
  • Unbalanced load protection
  • Independent Earth Fault trip
  • USB connectivity
  • Backed up real time clock
  • Fully configurable via DSE Configuration Suite PC software
  • Advanced SMS messaging (additional external modem required)
  • Start & stop capability via SMS messaging
  • Additional display screens to help with modem diagnostics
  • DSENet® expansion compatible
  • Integral PLC editor
Enquire
DSE8860

DSE8860

Auto Transfer Switch & Mains (Utility) Graphical Colour Display Control Module

The DSE8860 is an intelligent graphical colour display single or multi-mains (utility) controller with automatic transfer switch capabilities. The control module synchronises single or multiple set systems in conjunction with DSE synchronising & load share control modules. 

OVERALL SIZE
245 mm x 184 mm x 50 mm
PANEL CUTOUT SIZE
220 mm x 160 mm
MAXIMUM PANEL THICKNESS
8.0 mm
WEIGHT
0.88kg
PRODUCT VARIANTS
8860-01 - 8860 Auto Transfer Switch & Mains (Utility) Graphical Colour Display Control Module

KEY FEATURES

  • Colour LCD graphical display
  • Configurable digital inputs (12)
  • Configurable outputs (10)
  • Configurable flexible sender inputs (2)
  • Comprehensive electrical protection
  • Comprehensive loadshare capabilities
  • Mains (utility) fail sensing
  • Multiple mains (utility) monitoring, when using multiple DSE8860s
  • Peak lopping
  • Peak shaving
  • RS232, RS485 & Ethernet remote communications
  • Modbus RTU/TCP support
  • Configurable display languages
  • Audible alarm
  • Reduced file transfer time
  • Fault condition notification to a designated PC
  • Compatible with DSE8700 & DSE8600 Series
  • Front panel editing with PIN protection
  • Configurable timers and alarms
  • Multiple date and time scheduler
  • Configurable event log (250)
  • Easy access diagnostic page
  • kW overload protection
  • Reverse power protection
  • Power monitoring (kW h, kV Ar, kV A h, kV Ar h)
  • USB connectivity
  • Backed up real time clock
  • Fully configurable via DSE Configuration Suite PC software
  • Advanced SMS messaging (additional external modem required)
  • Start & stop capability via SMS messaging
  • Additional display screens to help with modem diagnostics
  • DSENet® expansion compatible
  • Integral PLC editor
Enquire
DSE8920

DSE8920

7" Colour Load Share & Synchronising Control Module

The DSE8920 7" Colour Load Sharing & Synchronising Control Module has been designed to parallel single generators with a mains (utility) supply. The module offers the added flexibility of being configurable to function as a DSE8910 Auto Start Load Share Control Module for paralleling up to 32 generators with multiple mains (utility) supplies. 

Key features of the module include a full colour 7" optically bonded display, 800 x 480 pixel graphical user interface, built-in AVR, governor and CAN control, Two types of KW/VAr sharing support and drag & drop advanced PLC editor.

OVERALL SIZE
310 mm x 162 mm x 51 mm (9.6" x 7.2" x 2.0")
PANEL CUTOUT SIZE
282 mm x 136 mm (8.7" x 6.3")
MAXIMUM PANEL THICKNESS
8.0 mm (0.3")
WEIGHT
1.0 kg
PRODUCT VARIANTS
8920-01 - 8910 7" Colour Load Share & Synchronising Control Module

KEY FEATURES

  • 7” optically bonded, sunlight readable colour TFT display (800 x 480)
  • Comprehensive synchronising & load sharing capabilities
  • Built in governor, AVR & CAN control
  • Base load (kW export) control
  • Positive & negative kVAr export control
  • Mains (Utility) decoupling protection
  • Mains (Utility) failure detection
  • Mains (Utility) power (kW, kV Ar, kV A & pf) monitoring
  • RoCoF and vector shift protection
  • Mains (utility) kW export protection
  • Peak lopping & shaving functionality
  • Multiple display languages
  • Five key menu navigation
  • LCD alarm indication
  • DSENet® expansion compatibility
  • Data logging & trending facility
  • Drag & drop advanced PLC editor
  • Protections disable feature
  • Fully configurable via PC using USB, RS485 & Ethernet communication
  • Front panel configuration with PIN protection
  • Power save mode
  • 3 phase mains (utility) & generator sensing and protection
  • Generator current and power monitoring (kW, kvar, kVA, pf)
  • kW and kvar overload alarms
  • Reverse power alarms
  • Over current protection
  • Unbalanced load protection
  • Independent earth fault protection
  • Breaker control via fascia buttons
  • Fuel and start outputs configurable when using CAN
  • 8 configurable DC outputs
  • 2 configurable volt-free relay outputs
  • 4 configurable analogue/digital inputs
  • Built in sensors to support 0 V to 10 V & 4 mA to 20 mA
  • 12 configurable digital inputs
  • Configurable 5 stage dummy load and load shedding outputs
  • CAN, MPU and alternator frequency speed sensing in one variant
  • Real time clock
  • Manual and automatic fuel pump control
  • Engine run-time scheduler
  • Fuel usage monitor and low fuel level alarms
  • Simultaneous use of all communication ports
  • Remote SCADA monitoring via various DSE software applications
  • MODBUS RTU & TCP IP support with configurable MODBUS pages
  • 3 configurable maintenance alarms
  • Compatible with a wide range of CAN engines, including tier 4F, stage 5 engine support
  • Uses DSE Configuration Suite PC Software for simplified configuration
Enquire